Contact Us
Energy Saving 150hp 110kW Electric Driven RotaryTwo Stage Screw Air Compressor
Two-stage Compression Double Screw Air Compressor, screw rotor adopts a two-stage compression engine, is to use two groups of size is not consistent, reasonable distribution of pressure, lowering the pressure level at each level compression ratio. Reduce the leakage and improve the volumetric, reduce the bearing load, improve the bearing life, prolong the life of the host. The inlet of the main engine adopts the axial inlet, and the intake noise is reduced. Direct drive, high efficiency, low vibration and low noise.
Technical parameter
1.power frequency
| ODEL | Air flow Capacity (m³/min) |
Power (kW) |
Noise (DB) |
Outlet Diameter |
Dimension ( mm) |
Weight (Kg) |
||||
| 0.6Mpa | 0.7Mpa | 0.8Mpa | 1.0Mpa | 1.3Mpa | ||||||
| DD-75 | 15.80 | 14.70 | 13.00 | 9.50 | 8.60 | 55 | 70 | DN50 | 2300x1300x1830 | 1534 |
| DD-100 | 18.80 | 17.40 | 15.50 | 12.80 | 10.00 | 75 | 72 | DN50 | 2300x1300x1830 | 1700 |
| DD-125 | 21.30 | 20.70 | 19.50 | 16.50 | 13.00 | 90 | 72 | DN65 | 2550x1630x1850 | 2080 |
| DD-150 | 26.50 | 26.30 | 25.00 | 20.00 | 18.80 | 110 | 72 | DN65 | 2550x1630x1850 | 2120 |
| DD-175 | 34.00 | 32.60 | 30.00 | 24.00 | 20.00 | 132 | 78 | DN80 | 3000x1828x2310 | 4850 |
| DD-220 | 41.00 | 38.00 | 37.00 | 29.60 | 24.50 | 160 | 78 | DN80 | 3000x1828x2310 | 5000 |
| DD-250 | 44.00 | 41.00 | 40.00 | 34.00 | 31.00 | 185 | 78 | DN100 | 3460x1940x2230 | 5900 |
| DD-275 | 48.00 | 44.00 | 45.00 | 40.00 | 33.00 | 200 | 78 | DN100 | 3460x1940x2230 | 6200 |
| DD-275 | 55.00 | 51.00 | 50.00 | 43.00 | 38.00 | 220 | 80 | DN125 | 3860x2130x2380 | 8500 |
| DD-350 | 60.00 | 57.00 | 56.00 | 47.00 | 43.00 | 250 | 80 | DN125 | 3860x2130x2380 | 8650 |
2.Permanent magnet
| Model | Air Delivery (m3/min) | Power (kW) | Noise (Db) | Outlet diameter | Dimension (mm) | Weight (Kg) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.7Mpa | 0.8Mpa | 1.0Mpa | 1.3Mpa | Length | Width | Height | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-30 | 4.50 | 4.20 | 3.40 | 2.60 | 22 | 68 | G1 | 1440 | 830 | 1265 | 840 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-40 | 6.05 | 5.80 | 4.18 | 4.00 | 30 | 68 | G11/2 | 1600 | 940 | 1410 | 950 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-50 | 7.50 | 6.80 | 6.00 | 4.60 | 37 | 68 | G11/2 | 1600 | 940 | 1410 | 1050 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-60 | 10.50 | 9.90 | 6.80 | 5.71 | 45 | 72 | G2 | 2000 | 1120 | 1590 | 1560 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-75 | 13.60 | 12.30 | 10.15 | 7.00 | 55 | 76 | DN50 | 2900 | 1470 | 1625 | 1780 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-100 | 16.00 | 15.50 | 12.80 | 10.20 | 75 | 76 | DN50 | 2900 | 1470 | 1625 | 2000 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-125 | 20.70 | 19.50 | 16.15 | 13.20 | 90 | 76 | DN65 | 3400 | 1757 | 1860 | 2700 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-150 | 24.80 | 24.00 | 20.20 | 15.21 | 110 | 76 | DN65 | 3400 | 1757 | 1860 | 3000 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-175 | 29.00 | 28.00 | 23.20 | 18.70 | 132 | 78 | DN80 | 3750 | 1900 | 1980 | 4650 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-220 | 34.00 | 32.50 | 28.00 | 23.10 | 160 | 78 | DN80 | 3750 | 1900 | 1980 | 4850 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-250 | 39.00 | 38.00 | 32.00 | 27.70 | 185 | 78 | DN100 | 3900 | 2100 | 1980 | 5900 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-275 | 43.20 | 42.00 | 38.10 | 31.90 | 200 | 78 | DN100 | 3900 | 2100 | 1980 | 6200 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-300 | 48.51 | 46.20 | 41.20 | 31.60 | 220 | 82 | DN100 | 4260 | 2182 | 2170 | 6200 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| DDM-350 | 52.50 | 51.00 | 45.80 | 37.20 | 250 | 82 | DN100 | 4260 | 2182 | 2170 | 6500 | |||||||||||||||||||||||||||||||||||||||||||||||||||
Two stage air end
Feature:Two-stage compressor air-end
Advantage:Low compression ratio, Low temperature rising, Low air leakage
Benefit:15% energy-saving
High-efficiency Motor
Feature:IE4 permanent magnet motor/IE4 High-efficiency motor
Advantage:Motor efficiency 97%
Benefit:5% energy-saving
Intelligent control
Feature:VFD system
Advantage:Constant pressure output to remove pressure fluctuation and off-load, Constant temperature output at 9-~85°C, Low starting current to protect components
Benefit:15% energy-saving
Smart display screen
Feature:Intelligent control system
Advantage:10 inch monitor to show all the date
Benefit:Simple operation and touble free
Cooling fan
Feature:Large cooler system
Advantage:Axial flow Fan used for good cooling effect
Benefit:Allow ambient temperature at 52°C
Systematic Design of Oil separator
Feature:Large oil system
Advantage:Reduce internal pressure loss avoid oil, Leakage for safety
Benefit:3% energy-saving
Filter
Feature:Double filtering system
Advantage:Remove impurity from air and cleanness
Benefit:Longer life air -end and lubrication oil
Air inlet valve
Feature:High vacuum degree:700mmHg
Advantage:Large suction area, Low load energy consumption in unloaded operation,
Fast check: prevent unloading and shutdown oil injection
Benefit:Cast aluminum to avoid rust and temperature change
About us
Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineersteams ’ .We focus on the research & develop,manufacture and energy-saving solutions of screw air compressor to create value for customers and society.In 2018 our total sales volume approached 15 million US dollars.By over 23 years enhanced experiences of designing,producing and marketing,today our valued customers are over 130 countries.
Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.
Dehaha’s primary businesses focus in following key areas:
Oil-injected rotary screw compressors
Portable screw air compressors
Oil free air compressors
High pressure air compressors
Air treatment equipment
FAQ
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of Qidong(Close to Shanghai), China, more than 24 years.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
2. Some key parts are imported from overseas
3.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
Send your inquiry directly to us
